首頁 > 影音產品 > 各品牌投影機 > 工程投影機系列 > Panasonic PT-RQ50K 4K 50000流明 投影機

Panasonic PT-RQ50K 4K 50000流明 投影機

  • Panasonic PT-RQ50K 4K 50000流明 投影機
  • Panasonic PT-RQ50K 4K 50000流明 投影機
LIBETTER × Panasonic

Panasonic PT-RQ50K

售價:NT$9,800,000
價格如有調整,以實際訂購時為準

主要規格

亮度 50000 lm
解析度 4K
投射比 依選配鏡頭
光源 雷射
光源壽命 20,000 小時
對比度 20,000:1
鏡頭位移 依選配鏡頭
縮放 依選配鏡頭

Panasonic 官方產品圖片

PT-RQ50K

Panasonic 官方詳細規格

Projector type 3-Chip DLP™ projector
Panel size 35.1 mm (1.38 in) diagonal (17:9 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Number of pixels 8,847,360 (4096 x 2160 pixels) x 3
Light source Laser diodes (Blue LD, Red LD)
Light output *1 ? ISO/IEC 21118: Brightness measured complied with ISO/IEC 21118: 2020 international standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m 2 ). Value is the average of all products when shipped. ANSI lm: Brightness measured complied with American National Standards Institute standards. Measure average illuminance level (lux) of 9 points which are divided on the projected area, and multiply by projected area (m 2 ). Value is the average of all products when shipped. Result of Brightness measured complied with ISO/IEC 21118 and ANSI will be same. Center lm: Measured Illumination level at the center of screen (lux) multiplied by projected area (m 2 ). Value is the average of all products when shipped. When comparing projectors, it's essential to ensure that the brightness ratings are measured using the same standard to get an accurate comparison. 50,000 lm *2 / 50,000 lm (ANSI) *3 / 51,000 lm (Center) *4
Time until light output declines to 50 % *5 20,000 hours (NORMAL)
Resolution Native 4K (4096 x 2160 pixels)
Contrast ratio *2 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Screen size (diagonal) 2.54–38.1 m (100–1,500 in) with new optional lens for PT-RQ50K, 17:9 aspect ratio
Center-to-corner zone ratio *2 90 %
Lens New optional lenses for PT-RQ50K (no lens included with this model)
Vertical (from center of screen) ±45 % (±25 % with ET-D3QT600, ±30 % with ET-D3QT700/ET-D3QT800, ±40 % with ET-D3QW300) (powered)
Horizontal (from center of screen) ±16 % (±8 % with ET-D3QT600, ±10 % with ET-D3QT700/ET-D3QT800, ±14 % with ET-D3QW300) (powered)
Keystone correction range Vertical: ±40 ° (±28 ° with ET-D3QW300), Horizontal: ±40 ° (±15 ° with ET-D3QW300)
Installation Horizontal/vertical, free 360-degree installation
MULTI PROJECTOR SYNC IN BNC x 1
MULTI PROJECTOR SYNC OUT BNC x 1
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN M3 stereo mini-jack x 1 for wired remote control
REMOTE 1 OUT M3 stereo mini-jack x 1 for link control
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
LAN RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible
DC OUT USB Connector (Type A) x 2 for power supply only (DC 5 V, total of 2 A)
USB USB connector (Type A) x 1 for optional Wireless Module (AJ-WM50 Series) / USB Memory Stick
Expansion Slot 1 Interface Board for 12G-SDI (ET-MDN12G10) supplied
Expansion Slot 2 Optional interface boards, SLOT NX compatible
Power supply AC 200–240 V, 50/60 Hz; AC 100–120 V, 50/60 Hz
Maximum power consumption 4,100 W (AC 100–120 V: 1,100 W, Standby Mode: 6 W)
On-mode power consumption (Operating mode) [NORMAL] 3,970 W [ECO] 3,110 W
Cabinet materials Fabricated metal and molded plastic
Operation noise *2 52 dB
Dimensions (W x H x D) 720 x 445 x 1,070 mm (28 11/32˝ x 17 17/32˝ x 42 1/8˝ ) (excluding handle, adjuster feet, and other protruding parts)
Weight *6 Approx. 126 kg (278 lbs) (without lens)
Operating environment Operating temperature: 0–45 °C (32–113 °F) *7, *8, *9 , operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Visual Software Suite, Geometry Manager Pro, Smart Projector Control for iOS/Android™

投影機規劃・安裝・售後服務

03-4893505|全省服務|LINE ID:@libetter

TOP